How does a hot air balloon work?
Short answer
Heating the air inside the envelope causes the air molecules to spread out and take up more space. This makes the air inside the balloon lighter and less dense than the surrounding cooler air, generating an upward buoyant force that lifts the balloon off the ground.
about a 20-second read
Density and buoyancy
When the propane burner heats the air inside the balloon, the temperature rises and the air molecules move faster. The air expands and is partly pushed out through the bottom opening. Because the same volume now contains fewer molecules, the air inside the envelope weighs less than an equal volume of cold air outside. According to Archimedes' principle, this difference in density creates a buoyant force that lifts the entire balloon and its basket.
Main components of the balloon
Envelope
The large fabric section of the balloon is made from durable rip-stop nylon or polyester sewn into panels. The fabric is treated to withstand heat, reduce air leakage, and resist UV radiation.
Burner
The burner is mounted directly beneath the lower opening of the envelope. It draws liquid propane gas from tanks, vaporizes it in a coil, and ignites a controlled flame that can reach temperatures over 1,000 °C.
Basket
Passengers and propane tanks are housed in a hand-woven rattan basket. Rattan is lightweight, strong, and flexes upon impact to cushion the landing.
Top vent
At the top of the envelope is a fabric vent that the pilot can open using a line. Releasing warm air allows the pilot to initiate a controlled descent.
How a flight is conducted
- 01
1. Cold inflation with a fan
The envelope is laid out on the ground and connected to the basket. A gasoline-powered fan blows cold air inside to fill out the envelope.
- 02
2. Heating
The burner is lit and directed into the opening. As the air heats up, it becomes lighter than the surrounding air and lifts the envelope upright over the basket.
- 03
3. Steering via altitude selection
To climb, the pilot fires the burner in short bursts. To descend, the air is allowed to cool or the top vent is opened. Horizontal navigation is achieved by ascending or descending to an altitude where the wind blows in the desired direction.
The misconception that a hot air balloon has a rudder
A hot air balloon has no rudder or steering wheel. It cannot be turned directly to the left or right. The pilot can only adjust altitude, and horizontal movement relies entirely on the wind directions present at different altitudes.
Summary
A hot air balloon lifts off because warm air is less dense than cold air. A propane burner heats the air inside the envelope so the balloon becomes lighter than the surrounding air, while the woven rattan basket carries passengers and fuel. Navigation is performed by changing altitude to utilize wind currents.
Sources
- [PDF] How a Hot Air Balloon Works and Its Major Parts — Cabq (Accessed 2026-10-26)
- How does a hot air balloon fly? - for How Things Fly — Si (Accessed 2026-10-26)
- Varmluftsballong - DreamBalloon AB — Dreamballoon (Accessed 2026-10-26)
- Så fungerar en luftballong - Friktionsfri ballongflygning — Friktionsfri (Accessed 2026-10-26)
Get today's concept by email
Get one short, thought-provoking concept in your inbox each day. Unsubscribe at any time.
By subscribing you agree to our privacy policy. We never sell or share your address.