How does an airbag work?
Short answer
An airbag deploys when crash sensors detect rapid deceleration and send an electrical signal to a gas generator. The signal ignites a chemical propellant that rapidly generates nitrogen gas. The gas fills a folded nylon bag in less than 0.05 seconds to cushion the occupant during a collision.
about a 20-second read
The physics of deceleration
In a crash, the vehicle stops rapidly, but the occupants' bodies keep moving forward due to momentum. Without an opposing force, the occupant strikes the car's rigid interior. To reduce injury risk, the body must be slowed down over a longer duration and surface area. The airbag acts as a soft cushion that catches the occupant and evenly distributes the deceleration force.
The process from crash to deflation
- 01
1. Sensors detect deceleration
Crash sensors detect the sudden change in speed during a collision and instantly send an electrical signal to the control unit.
- 02
2. Ignition and chemical reaction
The electrical signal activates an igniter inside the gas generator. The igniter triggers a chemical reaction where a propellant, often sodium azide and potassium nitrate, burns rapidly.
- 03
3. Nitrogen gas inflates the nylon bag
The reaction generates large amounts of harmless nitrogen gas, expanding and inflating the folded nylon bag in about 0.05 seconds.
- 04
4. Cushioning via vent holes
As the occupant hits the bag, gas escapes through vent holes in the fabric. This ensures controlled deceleration rather than a hard rebound.
Key system components
Crash sensors
Accelerometers located in the vehicle chassis that measure deceleration forces and determine if the impact is severe enough to deploy the bag.
Electrical igniter
A small component that receives the current signal from the control unit and generates the heat required to ignite the chemicals.
Chemical charge and gas generator
A sealed metal container with solid chemicals that, when heated, instantly convert into a high volume of gas.
Nylon bag
A thin, durable bag made of woven nylon fabric, stored folded behind the steering wheel hub or dashboard.
Vent holes
Small openings in the sides or back of the nylon bag that allow gas to escape when the body strikes the cushion.
Common misconception: Airbags replace seat belts
A common misconception is that airbags are designed to protect unrestrained passengers. Airbags are technically known as Supplemental Restraint Systems (SRS) and work effectively only when used with a seat belt. Without a seat belt, an occupant moves too far forward before the bag is fully inflated, which can cause severe injury upon impact.
Summary
The airbag protects vehicle occupants by converting a chemical reaction into an inflated nylon cushion in a fraction of a second. When crash sensors detect rapid deceleration, the propellant in the gas generator ignites, filling the bag with nitrogen gas. Vent holes release the gas during impact to safely absorb kinetic energy.
Sources
- Airbag Deployment Systems — Clemson (Accessed 2026-10-02)
- The Engineering Behind Automotive Airbags - Illumin Magazine — Usc (Accessed 2026-10-02)
- How Airbags Work - Auto | HowStuffWorks — Howstuffworks (Accessed 2026-10-02)
- Vehicle Air Bags and Injury Prevention - NHTSA — Nhtsa (Accessed 2026-10-02)
Get today's concept by email
Get one short, thought-provoking concept in your inbox each day. Unsubscribe at any time.
By subscribing you agree to our privacy policy. We never sell or share your address.